CO2 60–100W · 10600nm
Starting settings for Hardwood (oak) on a CO2 60–100W machine
Focus on the material surface (ramp-test if you have never dialed this machine).
Copy into a test grid
P 30–65% × S 10–25 mm/s · 5×5 on scrap · circle the sweet spot
How to dial it in
The chip row above is the middle of the known-good window for a co2 60–100w on hardwood (oak). It is a starting point, not a guarantee: two co2 machines with the same sticker can want different numbers once lens condition, air pressure, and material batch get involved.
Run the bracketed grid on the exact scrap you plan to sell. Watch for clean edges with minimal char and full separation — add a pass before you add power. Then log the winning cell so the next batch starts from your machine’s truth, not a forum thread’s.
Safety first, every time
Ventilate, keep a fire blanket or extinguisher within reach, and never leave the laser running unattended. If you are ever unsure a material is safe, it isn’t — chlorinated plastics like PVC and vinyl release chlorine gas and never belong on the bed. See the never-laser list.
Questions on this chart
What power and speed for hardwood (oak) on a co2 100w?
Start around 46% power and 17 mm/s. Then run a test grid from 30–65% × 10–25 mm/s on scrap and circle the sweet spot — your lens, air, and material batch shift the window.
Do these CO2 100W settings transfer to other machines?
They transfer within the class — any honest 60–100W tube co2 machine is a good starting match. Across classes they do not: power percentages mean different energies on different sources, which is exactly why the library is class-based.
Why does the chart say “starting points only”?
Starting points only — every tube/diode, lens, and material batch differs. Always run a test grid on scrap. Ventilate; never leave a laser unattended.
The short list
The full ranking lives on our best-gear hubs.
- Check price
Amazon Prime — Free Trial
- Check price
Kindle Unlimited — Free Trial
- Check price
powder coated tumblers 20oz blank
A quick, honest note: some links on this page are affiliate links. As an Amazon Associate we may earn a commission when you buy through them — at no extra cost to you. It never changes the price you pay.
60 guides published
42 products vetted
125 reader price checks
Featured merch
Original designs, made to order.
